Tri-Clamp Tees

from $2.00

Assortment of stainless steel tri-clamp fittings, most are one of a kind.

Stainless Steel Tees:

(A) 1” TC on 4.5” flange (measurement A=2.25”) 1/2" OD to 2” flange (measurement B=2”)
(B) 1” TC on 5.25” flange 1/2" OD to 3” flange - 316L
(C) 1" TC on 7" flange 1/2" OD to 1.5" flange (approx)
(D) 1" TC on 3" flange 3/4" OD to 1.5" flange (approx)
(E) 1" TC on 6" flange 3/4" OD to 1.5" flange (approx)
(F) 2.5” TC on 7” flange 2” OD to 3.5” flange
(G) 2” TC inlets on 15” long flange with 1.5” ID to two 2” TC outlets with 1” ID each 3” from flange ends (verify this item dimensions)

Plastic Tees:

(H) 5.25” x 5.25” tees with 1” TC

A couple need to be remeasured as noted.

Type:

1" TC 1/2" OD - 4.5" x 2.25" 1" TC 1/2" OD - 5.25" x 2.75" 1" TC 1/2" OD - 7" x 1.5" 1" TC 3/4" OD - 3" x 1.5" 1" TC 3/4" OD - 6" x 1.5" 2.5" TC 12.5" TC - 7" x 3.5" 15" multiport Plastic

Quantity:

Add To Cart

Assortment of stainless steel tri-clamp fittings, most are one of a kind.

Stainless Steel Tees:

(A) 1” TC on 4.5” flange (measurement A=2.25”) 1/2" OD to 2” flange (measurement B=2”)
(B) 1” TC on 5.25” flange 1/2" OD to 3” flange - 316L
(C) 1" TC on 7" flange 1/2" OD to 1.5" flange (approx)
(D) 1" TC on 3" flange 3/4" OD to 1.5" flange (approx)
(E) 1" TC on 6" flange 3/4" OD to 1.5" flange (approx)
(F) 2.5” TC on 7” flange 2” OD to 3.5” flange
(G) 2” TC inlets on 15” long flange with 1.5” ID to two 2” TC outlets with 1” ID each 3” from flange ends (verify this item dimensions)

Plastic Tees:

(H) 5.25” x 5.25” tees with 1” TC

A couple need to be remeasured as noted.

Assortment of stainless steel tri-clamp fittings, most are one of a kind.

Stainless Steel Tees:

(A) 1” TC on 4.5” flange (measurement A=2.25”) 1/2" OD to 2” flange (measurement B=2”)
(B) 1” TC on 5.25” flange 1/2" OD to 3” flange - 316L
(C) 1" TC on 7" flange 1/2" OD to 1.5" flange (approx)
(D) 1" TC on 3" flange 3/4" OD to 1.5" flange (approx)
(E) 1" TC on 6" flange 3/4" OD to 1.5" flange (approx)
(F) 2.5” TC on 7” flange 2” OD to 3.5” flange
(G) 2” TC inlets on 15” long flange with 1.5” ID to two 2” TC outlets with 1” ID each 3” from flange ends (verify this item dimensions)

Plastic Tees:

(H) 5.25” x 5.25” tees with 1” TC

A couple need to be remeasured as noted.